无刷直流电动机的新型自适应模糊神经控制

 为无刷直流电动机提出了一种自适应模糊神经控制方法.这是一种建立在开关控制、模糊控制和自适应控制相结合基础上的控制方法,并用神经网络实现了模糊控制器和自适应机构.在无刷直流电动机的双闭环调速系统中,电流控制器是PI控制器;转速控制器是由1个开关控制器和1个包括自适应机构在内的模糊控制器相结合组成的,且用1个3层前向神经网络离线学习实现了模糊控制器,学习算法采用的是改进的BP算法.用1个单神经元通过在系统运行过程中的动态学习实现了自适应机构,学习算法选用了有监督的Hebb学习算法.由电机所处的运行阶段决定哪一个控制器工作.此控制算法的仿真结果说明,它使系统具有良好的动、静态特性和自适应性.     

低频电连接器检测方法研究CSCD

本文主要阐述了低频电连接器外观检测和电性能测试中的接触电阻、绝缘电阻和介质耐电压的检测方法及其注意事项,提出为满足武器系统对低频电连接器耐恶劣环境、高可靠的特殊需求,有效保证武器型号系统中电连接器的质量,必须规范低频电连接器外观及电性能指标检测标准。本文可为从事低频电连接器检测工作的人员提供参考。     

轴流压气机吞水后的性能变化研究

为了探究航空发动机吸入雨水后压缩系统的特性变化,针对水滴进入压气机后的湿压缩过程展开研究。基于两相流动的基本原理构建了气液两相的传热传质模型和颗粒运动模型,采用一维逐级叠加的方法计算压气机各级性能,并利用Fortran程序对吞雨后压气机整体性能进行了计算。计算结果表明当吞雨量从3%增加到15%时,压气机压比的下降幅度分别由5.7%增加至15.7%;压气机各级温比的变化特性揭示了液滴在压气机前面级蒸发小、后面级蒸发大的规律;通过对比干、湿压缩条件下的压气机整体特性,可得出吞雨后压气机稳定工作范围变窄的结论。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

面向增材制造的飞行器结构优化设计关键问题

围绕飞行器复杂结构整体构型研制的高性能、轻量化苛刻需求,着重介绍了面向增材制造的结构优化设计面临的系列关键问题以及相关研究成果。分别从面向增材制造的结构多承载环节整体优化建模与性能分析、整体结构多学科性能与功能综合设计方法、跨尺度结构-微结构性能表征与尺度效应的影响机理,以及增材制造工艺对整体结构件性能的影响机理和制造工艺约束4个方面,阐述如何从结构力学与工艺力学角度科学实现最优性能设计与先进增材制造技术的完美匹配与融合。     

一种新颖的基于总能量守恒的化学平衡流算法

在推进剂燃烧的建模上,传统的热力计算方法一般基于总焓守恒求解定压绝热燃烧温度和平衡组分,不能考虑壁面传热;在燃气流动的建模上,通常采用的冻结流模型认为本地的组分及热物理性质与燃烧室瞬时一致,忽略了这些参数因来流气体与本网格滞留气体掺混带来的随时间的缓变效应。提出了一种新颖的可以考虑壁面传热的基于总能量守恒的化学平衡流计算方法,运用Fortran2008语言,采用面向对象编程方法建立了化学平衡流燃气发生器管道的模块化仿真模型,并将该模型应用到一个包含42个组件的涡轮试验台气路系统的建模与仿真中。与早期模型仿真结果及试验数据的对比发现,新模型的仿真结果有一定改进,更加接近试验数据。     

空间压力容器可靠性定量设计方法研究

针对空间压力容器常规设计方法难以满足航天技术快速发展对轻质量、低成本、高可靠的需求,基于可靠性理论中应力-强度干涉模型,建立空间压力容器可靠性设计数学模型。结合某型号钛合金球形气瓶随机变量统计数据,开展了气瓶可靠性定量设计。计算结果表明,可靠性定量设计方法能够给出产品可靠度定量指标,并在一定程度上降低空间压力容器结构重量。     

Relay selection in cooperative communication systems over continuous time-varying fading channel

In this paper, we study relay selection under outdated channel state information (CSI) in a decode-and-forward (DF) cooperative system. Unlike previous researches on cooperative commu-nication under outdated CSI, we consider that the channel varies continuously over time, i.e., the channel not only changes between relay selection and data transmission but also changes during data transmission. Thus the level of accuracy of the CSI used in relay selection degrades with data transmission. We first evaluate the packet error rate (PER) of the cooperative system under contin-uous time-varying fading channel, and find that the PER performance deteriorates more seriously under continuous time-varying fading channel than when the channel is assumed to be constant during data transmission. Then, we propose a repeated relay selection (RRS) strategy to improve the PER performance, in which the forwarded data is divided into multiple segments and relay is reselected before the transmission of each segment based on the updated CSI. Finally, we propose a combined relay selection (CRS) strategy which takes advantage of three different relay selection strategies to further mitigate the impact of outdated CSI.     

空间模拟碎片释放装置技术方案

为配合空间碎片主动清除技术的演示验证试验,提出了一种空间模拟碎片释放装置的技术方案:由模拟碎片及分离解锁装置组成。模拟碎片不具备任何合作特征,最初通过压紧杆与分离解锁装置相连,释放时由火工切割器切断压紧杆,模拟碎片在压缩弹簧的驱动下与分离解锁装置分离。最后,通过静载、模态、运动特性分析及分离解锁试验验证了该释放装置设计的正确性。     

航母编队网络化协同反导装备体系建设探讨

随着信息技术的发展,航母编队建设网络化协同作战体系,成为提高其作战能力的必由之路。在借鉴美军网络化作战装备体系建设的基础上,对航母编队网络化协同反导作战装备体系的构成和主要功能进行了阐述,并对未来向着"以网络为中心"的发展方向进行了探讨。